Find and Compare Local Contractors
Construction Defects and EIFS Information Home Inspections and Inspectors Find Local Building Codes Information on Asbestos and Removal Learn About Radon and Irradication Resources for Mold and Mildew Cleanup Get Proper Air Quality with Clean Ducts
Construction / EIFS Home Inspection Building Codes Asbestos Radon Mold Air Quality

EIFS Repair Contractors

OK, so you need repairs.  Now what? The following guidelines should help.

Most of them can be used when hiring any type of contractor, EIFS, remodeling, or otherwise. many of my client's lives would be much easier if they would have followed a few basic rules when they hired their contractor(s). Of course if they would have, they wouldn't be my clients. The larger the job, the more important these little details become. Some things may not be necessary on small jobs.

If possible, use your inspection report as a scope of work. A good report that is based on a good inspection will outline the repairs that should be made to your house. The report may not give you a step by step guide for each repair, but it should include the expected results of the fix. Do yourself a favor. Don't hire an inspector who also does repairs. If you do, make sure that they understand that they will not be performing the repairs on this house. Repairs will need to be done by competent and experienced contractors.

FINDING THE RIGHT CONTRACTOR:

 Finding a contractor isn't hard, Here in Atlanta, you can't swing a dead cat without hitting one. But, finding the best contractor for EIFS repairs is like finding a good contractor for anything else... it can be tough unless you follow a few simple guidelines.

1. Start with a goal of finding 3 licensed contractors to make repair bids.3 bids should be plenty if you follow these steps.

2. Professionals to ask:

Qualified EIFS inspectors are an excellent source for information regarding EIFS contractors. The reason an EIFS inspector would be helpful is because they have seen all levels of work, the good, the bad, and the ugly. (NOTE: NEVER, NEVER, NEVER let the inspector bid on the contract that he/she recommends. This is the proverbial fox watching the henhouse. You also need to be aware of your inspecting company and/or individual inspector trying to become your contractor.  You could also be roped into allowing your inspector/contractor to become the "so called" insurance company that wants to insure the work they just completed.) 

A quality contractor that I have found can be contacted at  www.BNBCI.com

 Places to look:

A. Yellow Pages:

The yellow pages are a good place to get basic information on a company. You can retrieve their telephone numbers and call the Better Business Bureau  for a history on the company, if they are listed with the BBB.

B.  You can also call each company listed and ask questions about the company. Some determining factors should be1. Is there someone there to talk to during business hours?

2. Was the receptionist/secretary couteous, helpful to assist?

3. Are they state licensed or certified? NOTE: Most southeastern states require a license for all contractors except Georgia, but there are some special licenses that contractors in Georgia obtain such as heating/air,   electrical, plumbing, etc., but not general contractors. Always ask for proof    of license.

4. Ask if their estimates can be itemized for possible litigation purposes.

5. Are they insured with Workmans Compensation and General Liability.

            !!! This is a very big factor !!!

C.  The internet:

The internet is also a great source for information. A well known web site for contractors is The National Association of Home Builders (www.nahb.com). The NAHB has a registry of contractors who have successfully received   training concerning EIFS directly from them.

D.  Look at and talk to the contractors. First impressions can be very telling. If they look kinda scary just walking up your sidewalk, do you really want them    around your house for days or weeks? Remember, the owner or superintendent is probably the neatest one of the bunch. It has become common practice for contractors to request a fee for some estimates. A professional contractor will credit the estimate fee back to the customer if work is approved and completed per the contract. If you are still comfortable with them after a chat, invite them to bid on the job. Provide each with the same scope of work. That way, everybody's bidding on the exact same job. Sometimes methods will differ, but the end result (especially the warranty)should be the same. Your "bid package" should contain at least the following items, and they should be included in the final contract:

1.  Scope of work - This can be obtained from your inspection report, you can use the report itself, or you can make your own list. If you require specific elements such as name brand or type of materials, include these. The more detail the better.

2.  Time Frame - A time range for the beginning and ending dates of thejob. Remember, though customers sometimes cause  unnecessary delays. Don't be surprised if the contractor wants to penalized you if this happens. That's only fair.

3.  Payment Schedule - The best schedule for you is no payments until the work is completed. However, most contractors won't agree to this. I know...many sources say that a goodcontractor should have the financial resources to cover the job.The fact is that on a job of several thousand dollars, most contractors will require payments due at certain increments of completion. Remember, just as it's not wise on your part to pay the whole fee up front, it's also not   wise on the contractor's part to trust you to pay the whole fee at the end. This trust and honesty thing works  both ways. Let all bidders know that payment schedules should reflect a percentage of retainage at all times. Remember, payments are made at increments of work completed, not callendar dates. Specify that signed "Lien Waivers" will   be collected as the sub-contractors finish their work. This ensures  that they have been paid and prevents you from having to   pay for   the work twice. In most states, even if you have paid  the general contractor, if he hasn't paid his subs they can come  after you for the money. Scary, isn't it!

4.  Change order agreements - Make sure that everyone understands the need to have a written agreement for changes made during the course of the job. A change order should describe the change, who requests it, how the changes will affect the schedule, and how it  will affect the work budget. Changes shouldn't take place without this form, signed by the contractor and you. By the way,don't request changes from the subcontractors that you didn't hire. remember, they're working on your project but they don't   work for you. The best thing to do is plan the job thoroughly and keep change  orders to a minimum. You don't know how expensive they can be.

5.  Miscellaneous requirements - Be sure to include things like proof of general liability insurance (in case they hurt your house) and   workman's   compensation (in case they hurt themselves). Do not accept a"Certificate of Insurance" from the contractor. Call their  insurance agent and have them fax you one. Also, if you don't  want 5 guys working on your house at 7:00 am on Sunday morning, now's the time to say so. Include an accceptable range of work days and hours.

No matter how you find them, now is the time to check their references and view past work. Do not skip this step. It's one of the most important. Ask the contractor for references of work that is similar to yours. Try to check jobs performed over a period of time. Say...one in progress, one a year old, and maybe one that is several years old. Talk to other customers, ask them what they liked and didn't like about the experience (a large job is indeed an experience).

To sum it up:

It is recommended that you need to get 2 - 3 estimates from different contractors. Once the estimates are received, sit down and compare all the estimates. Make sure all items are covered, if one estimate covers something that another estimate doesn't. Make a note to call the contractor(s) and ask why they are estimating or why they are not estimating something. Before making such a large decision, you need to be able to compare apples to apples not apples to oranges. NOTE: Do not accept a lump sum estimate for several different tasks, because it could be an expensive lesson, it would also work against you if you were in/going to negotiate the scope or a dollar amount with your contractor. It also leaves you open for unjust additional cost that can be added but should have been bid. Here again, don't get caught in that low bid...got the job...but it ended up being higher than the high bid.

NOW YOU HAVE CHOSEN A CONTRACTOR

FIRST have their insurance carrier send proof of insurance to you!! Do not accept a copy from the contractor. 

SECOND make sure you have a contract. Read it carefully, it should have provisions for an estimated starting date, estinated completion date, total dollar amount (advancement if required), a draw schedule, a clause for any additional work has to be submitted to you for written approval prior to the work being done, and finally a warranty for their workmanship for at least one year and by all means make the contractor get a permit.

If your job is substantial enough in size, make sure your contractor agrees to allow you to have third party inspections of his work while in progress and make the payments schedule to the third party approvals. All this does, is give you another layer of protection and any good contractor will be happy to allow it.

 You're all set. Remember, QUALITY OF THE JOB, THE ACCOUNTABILITY OF SERVICES RENDERED AND THE RESPONSIBILITY FOR YOUR HOME is what's most important. Rest assured that although the job may not run perfectly, you've done all you can do. Expect problems to arise on large jobs. Many times the difference between a good contractor and a great one is not the fact that problems come up, but how they are resolved. Believe me, there are contractors out there that do care.

LAST, and most importantly... Try and have some fun with the project.