Find and Compare Local Contractors
Construction Defects and EIFS Information Home Inspections and Inspectors Find Local Building Codes Information on Asbestos and Removal Learn About Radon and Irradication Resources for Mold and Mildew Cleanup Get Proper Air Quality with Clean Ducts
Construction / EIFS Home Inspection Building Codes Asbestos Radon Mold Air Quality

Mold Repair

After the structure of a house has been in contact with a large amount of water, mold repair will be a necessary step before the home can be occupied again. The steps used to correct the problem will vary, depending on the amount of water that the building was exposed to, the area of the mold damage, and the types of materials that were affected. Some of these tasks can be carried out by the homeowner, while others may be more suitable for an experienced contractor.

In small areas of damage, such as the area around a plumbing leak, it is possible for the owner to complete the mold repair. Non-porous surfaces, such as tile or sealed wood can be wiped down with a solution of bleach and water, and that will kill the fungus successfully. Materials that absorb water, such as fiberglass insulation, drywall, and bare wood may require replacement to remove the mold.

When the damage is more extensive, a professional mold repair service is almost always required. The longer the surfaces of the home remains wet, the more likely it is for mold to take root in the structure. Professional services will have the appropriate diagnosis equipment, such as moisture meters, that will quickly, and effectively, find all areas that have been damaged by water intrusion and mold, even behind walls and under flooring.

Once the areas in need of repair are identified, the professionals can quickly start the mold repair process. All water-saturated areas will be stripped down to the framing, with all porous materials discarded. Then special fans and other drying equipment will be used to reduce the home to a reasonable percentage of moisture content. Finally, the professional service can replace all removed materials, and return the building back to original condition. By completing the mold repair process quickly, further damage to the home can be avoided, and this can save money on future repairs.